Nitro 4tech vs TC3 Buggy

[Metallover]

Originally Posted by lutach

Amain has the spool for the nitro http://www.amainhobbies.com/product_...pool-Nitro-TC3, don't know if they're compatibale with the electric TC3 (part # ASC1703). You could check Ebay.

I say skip the expensive spool and just rip the balls out! It'll work just as good.

[brushlessboy16]

use 2 part epoxy. smother all the internals- then clamp it together- that was my method on locking a ball diff- had to take it apart with a really big hammer.

[Metallover]

What's wrong with taking the balls out and tightening it down like a mofo? C'mon, my ways the best.

[TexasSP]

Use mighty putty, it has the power to do the job right!

[T-Bro]

HE GOT SMOKED!! Lol. I got it on video and I'll post it asap. I have a paper due tonight so I can't post it right now. He's moving up to the 3.3 motor now to see if that will get him a win next time.

[BrianG]

lol, not surprising. I can't imagine the size Nitro motor required to compete with a good BL setup.

[T-Bro]

I can't even hold you up like that... I'm uploading it now!!

[T-Bro]

HERE'S A QUICK PEEP AT IT...

[What's_nitro?]

Pwnage.

[kulangflow]

That's always fun! I raced a nitro Savage once with my bl-E-maxx. I stayed with him at half-throttle for a while, then wheelied as I passed him just for effect. :-)

Nice win!

[TwzteD]

You Took A DUMP on His Lid For Sure.

[T-Bro]

What's really funny is my servo saver was loose so I couldn't go full throttle until about 1/3 of the track was gone. If I could have opened up from the starting line... LIGHTS OUT! LOL.