Lehner Motors

[aqwut]

Originally Posted by Ryu James

yeah, it must have been just the setup. i didnt even realize it was the hi amp version either. i didnt know there was a hi amp and a regular at the time i bought it. i did like the build of the motor though. how where the wires extrude it is sealed off tight, unlike the neus. however, i wish they used a universal mounting pattern that was like the neus. anyway, i will have to try another lehner when i come across a good deal. i am always checking ebay.

I just picked up a 2280-13 non Hi-Amp version... and power was nothing comparable to the 2280-6 HiAmp... Also just arrived are 2 neus, 1515 1.5Y 1500KV & a 1509 2.5D 2700KV.. this time the shafts looked good, and one had the flat spot on it already.. but both were missing the bushing for the wires again, but I just put my own nylon tubing on there.. edges are sharp... I have yet to try these two...

I check out the Ebay germany all the time... I'm still watching that 2250 motor...

Originally Posted by aqwut

I just picked up a 2280-13 non Hi-Amp version... and power was nothing comparable to the 2280-6 HiAmp... Also just arrived are 2 neus, 1515 1.5Y 1500KV & a 1509 2.5D 2700KV.. this time the shafts looked good, and one had the flat spot on it already.. but both were missing the bushing for the wires again, but I just put my own nylon tubing on there.. edges are sharp... I have yet to try these two...

I check out the Ebay germany all the time... I'm still watching that 2250 motor...

I can't find any 2250 motor? Only a 2240...

[aqwut]

Originally Posted by Byte

I can't find any 2250 motor? Only a 2240...

Cr*p.. I missed it... only went for $225 hi amp version too... and brand new..

http://cgi.ebay.com/MIP-New-Lehner-B...d=p3286.c0.m14