Anyone using a 1515 2Y???

i went from 15 mins on a 5s 5000 pack with the 1y 2200 to 20 on a tekin 1550 on 5s 5000. big difference

[zeropointbug]

I went from 5s2p A123 to 7s2p/7s1p then to 6s lipo, each step up my temps went down drastically, well especially when going from 5s to 7s A123. Tons more power too... this is in a 1512/3D(1700kv.)... runs VERY cool now, at the track, usually runs around 115F after a 30 min. MAIN in ~80F weather. Weird I know!?

Really, 6s lipo is enough to keep current levels down to a safe limit, PERSONALLY... but I still have a desire to go higher in the future, say 12s.

[_paralyzed_]

Originally Posted by big greg

i went from 15 mins on a 5s 5000 pack with the 1y 2200 to 20 on a tekin 1550 on 5s 5000. big difference

what do I do with this post

play nice, Harold, play nice.............................

[littlegiant]

Originally Posted by big greg

i went from 15 mins on a 5s 5000 pack with the 1y 2200 to 20 on a tekin 1550 on 5s 5000. big difference

Are you using the same pinion?

[_paralyzed_]

Originally Posted by littlegiant

Are you using the same pinion?

hence post 18...........

well geez. i meant normal running setup for me, common sence tells ya that you would need to re-gear for whatever speed ya had or want. both are about 40 mph. 13/46 with the 2200. 16/46 with the 1550. anything else i can clear up? lol. speedo usually ran about 150-160 after mains and such with the 1y. now the mmm runs at a cool 102 even after a 20 min main! i likey

[_paralyzed_]

Originally Posted by big greg

well geez. i meant normal running setup for me, common sence tells ya that you would need to re-gear for whatever speed ya had or want. both are about 40 mph. 13/46 with the 2200. 16/46 with the 1550. anything else i can clear up? lol. speedo usually ran about 150-160 after mains and such with the 1y. now the mmm runs at a cool 102 even after a 20 min main! i likey

common sence? do you have a link i dunno what that is

i was just razzin' ya