CC Blower now on sale!

Do you need 3 channels to power this? Like on a Flux? Does it turn on at a certain temp or run all the time? I'm intrigued, despite fan haters like Brian

[shaunjohnson]

cool....or cold, idea...but like brian...i still dont like fans

[brushlessboy16]

It’s always better to reduce the heat generated in an electric power system is by better engineering than to try and cool things with fans and other gimmicks. Sure, a fan can get you a few degrees, but it is much better to have a superior design to begin with.

Contradiction?


Whats the flow rate of the fan?

[bcltoys]

Use at your own risk,your just covering up a problem. Not geared right.

Will the blower work on a non-finned original Neu 1515 motor?

[simplechamp]

Originally Posted by bcltoys

Use at your own risk,your just covering up a problem. Not geared right.

There's a big difference between using a fan to make a hot, overgeared setup barely usable, and using a fan to keep a cool, properly geared setup even cooler.

[BrianG]

Originally Posted by simplechamp

There's a big difference between using a fan to make a hot, overgeared setup barely usable, and using a fan to keep a cool, properly geared setup even cooler.

Agreed, but some don't realize this...

Originally Posted by Freezebyte

Do you need 3 channels to power this? Like on a Flux? Does it turn on at a certain temp or run all the time? I'm intrigued, despite fan haters like Brian

If you have a batt port where bec or receiver pack plugs in and you are not using it you can run it in there.

[glassdoctor]

Originally Posted by BrianG

Agreed, but some don't realize this...

u speeky no enrish two me!!!!!

[sabongi]

would it work on a tekin t8 motor?

gear it up!!!!!!!!!!!!

Originally Posted by Foxracin

If you have a batt port where bec or receiver pack plugs in and you are not using it you can run it in there.

Castle, whats the official word on this, me likey fans to keep things cool despite what the fan haters think

[sikeston34m]

You can run a fan off ANY unused port on a receiver.

They all have power for as long as your receiver has power.

its all about the plug, most likley it would come with a rx plug

[simplechamp]

Originally Posted by big greg

its all about the plug, most likley it would come with a rx plug

I would say it's more about the voltage rating. The plug can be easily changed, but you are stuck powering the fan at the specified voltage. I would guess it's a 5V fan so it can run directly off of the receiver though, and it would follow that they would use a standard RX/servo connector. I don't see why it would be anything else than 5V.