Castle 1717 - RC-Monster Forums

lutach · 11.05.2009, 11:29 AM

Never mind, I just looked at my HV110 and the processing board and the PCB under it is pretty much fried.

Pdelcast · 11.05.2009, 11:33 AM

Quote:

Originally Posted by lutach

Never mind, I just looked at my HV110 and the processing board and the PCB under it is pretty much fried.

Well, the car software won't work on the HV-110 anyway. It doesn't have the hardware for car software.

However, the ICE-HV-160 will have car software available soon (if we can ever get the Air version of the software done!!!)

You will be able to trade-in your HV-110 towards an ICE-HV controller...

lutach · 11.05.2009, 11:55 AM

Quote:

Originally Posted by Pdelcast

Well, the car software won't work on the HV-110 anyway. It doesn't have the hardware for car software.

However, the ICE-HV-160 will have car software available soon (if we can ever get the Air version of the software done!!!)

You will be able to trade-in your HV-110 towards an ICE-HV controller...

Sounds good Patrick. What's the word on the ICE 200? Is it a 6S or higher voltage rated ESC? If you can do an ICE-HV-160 with the car software before, I'll send my HV110 your way ASAP

.

Pdelcast · 11.05.2009, 12:23 PM

Quote:

Originally Posted by lutach

Sounds good Patrick. What's the word on the ICE 200? Is it a 6S or higher voltage rated ESC? If you can do an ICE-HV-160 with the car software before, I'll send my HV110 your way ASAP

.

ICE-200 is rated for 8S, and has a switching BEC integrated. The ICE-HV-160 is rated for 12S, and is opto-coupled.

Thanx!

lutach · 11.05.2009, 12:35 PM

Quote:

Originally Posted by Pdelcast

ICE-200 is rated for 8S, and has a switching BEC integrated. The ICE-HV-160 is rated for 12S, and is opto-coupled.

Thanx!

Opto is good. So when can I send my HV110 back? How do I go about doing it, since its out of warranty and I have no clue where the receipt is (I don't even remember where I got it from to be honest). Should I just put a note of some sort?

Now you have me thinking, my current set up in one of my truggy is for 8S, but the other truggy I can use 10S.

Pdelcast · 11.05.2009, 12:47 PM

Quote:

Originally Posted by lutach

Opto is good. So when can I send my HV110 back? How do I go about doing it, since its out of warranty and I have no clue where the receipt is (I don't even remember where I got it from to be honest). Should I just put a note of some sort?

Now you have me thinking, my current set up in one of my truggy is for 8S, but the other truggy I can use 10S.

I'm afraid you are going to have to wait until we have released the ICE-HV-160.

Then it will be a non-warranty upgrade, which costs the same as a non-warranty repair.

lutach · 11.05.2009, 12:53 PM

Quote:

Originally Posted by Pdelcast

I'm afraid you are going to have to wait until we have released the ICE-HV-160.

Then it will be a non-warranty upgrade, which costs the same as a non-warranty repair.

Ok, I'll wait.

coolhandcountry · 11.06.2009, 03:46 PM

Quote:

Originally Posted by Pdelcast

ICE-200 is rated for 8S, and has a switching BEC integrated. The ICE-HV-160 is rated for 12S, and is opto-coupled.

Thanx!

12 s setup is awesome.
I wish you had this out when I had my 12s setup.
It would have saved me a motor.

Ponders a another 12s setup