RC-Monster Forums  

Go Back   RC-Monster Forums > Support Forums > GorillaMaxx

 
 
Thread Tools Rating: Thread Rating: 6 votes, 5.00 average. Display Modes
Prev Previous Post   Next Post Next
Old
  (#11)
Rivermaxx
RC-Monster Aluminum
 
Offline
Posts: 638
Join Date: Sep 2008
11.08.2009, 09:56 PM

Did some testing today and it didnt go as good as I expected. Gyro worked awesome though highly recomended. Didn't hit 80 mph either but did manage some high speed wheelies with lots of sparks from the straightened out titanium skid. I changed the gear from 27/42 to 30/40 and the punch control and the throttle curve and the timing on the esc and I made it way to powerful when I get to about 80 % throttle. I set the timing @ at 5* advanced before it was 0*. I also set the punch control @ 80% instead of 90% like I had I before. I changed the curve so it ramped up faster @ 80% throttle and I think that was a big mistake, it wheelied at about 80% throttle every time and I had to let off. 75 mph wheely with lots of sparks can get exciting though it definatly will go faster if I can keep the front on the ground. I am going to put it back to they way it was before and do 80+mph next time out. Understand I have my son with the radar and my buddies 12 year old daughter with the 4 year old picture camera so the video. Here the vids not in order though.

This is the 75mph wheely had to let off didnt want a blow over.


This one I cut the center out of the wing thinking it was excessive rear downforce and tried again, Nope still comes up, damm it!


This one I had to let off because I almost hit the curb.
   
Reply With Quote
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump







Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com