MAX voltage on a RX8... - RC-Monster Forums

BrianG · 12.04.2009, 06:58 PM

IIRC, the RX8 uses the 4833 FET, which is 30v (I think). And that's not even counting the caps or other v-sensitive devices on there. And, who knows if the firmware will even arm at that level Also, you always want some headroom because of voltage spikes during braking. I would try maybe 7s Life, which is the same as 6s lipo.

whitrzac · 12.04.2009, 07:53 PM

Quote:

Originally Posted by BrianG

IIRC, the RX8 uses the 4833 FET, which is 30v (I think). And that's not even counting the caps or other v-sensitive devices on there. And, who knows if the firmware will even arm at that level Also, you always want some headroom because of voltage spikes during braking. I would try maybe 7s Life, which is the same as 6s lipo.

saddle pack layout...