RC-Monster XT8e!!

[rootar]

i havent dremeled these hubs for more throw yet.... they are off an xb8 buggy i have. but if i did dremel them for more toe i could swap back to the older aluminum steering link and gain another 3-4mm of clearance for more throw.....

im not sure what exactly is hitting the steering link on yalls trucks either the plastic ball cups or the servo saver but i put i just put a shim under the servo saver to just barely lower the ball link and now when it goes full lock if it kept going the steering lnk would go inbetween the ball cup and the servo saver all the way to the ball studs post... so thats another 4mm of clearance