RC-Monster Forums  

Go Back   RC-Monster Forums > Support Forums > Buggy

Reply
 
Thread Tools Rating: Thread Rating: 9 votes, 5.00 average. Display Modes
Old
  (#1)
powah
RC-Monster Stock
 
Offline
Posts: 24
Join Date: Oct 2009
01.19.2010, 10:10 AM

Hello Paul,

I have send you a PM thank you again for the parts and the lovely card!


No problem, well the body is a Proline Hyper 7. Proline don't sell them anymore but a shop also in The Netherlands still have them for sale http://www.the-border.com/product.ph...7&cat=0&page=1

The stickers i have with some vents on it are these, i have also the original lightning stickers and some hyper 7 stickers only 1 big vent and 1 small vent.




   
Reply With Quote
Old
  (#2)
nativepaul
RC-Monster Aluminum
 
nativepaul's Avatar
 
Offline
Posts: 522
Join Date: Jan 2007
Location: Sussex, England.
02.14.2010, 01:43 PM

I got some more done over the weekend, I was having some trouble with the shocks, with the angle I am laying them down at the lower spring seats were hitting the bottom wishbones and limiting suspension droop, so I bought a new set of wishbones and carved away the areas that they were hitting, I also took the opportunity to stiffen up the suspensionlaying the shocks down had softened up the initial movement and put more progression in it, so I rebuilt the shocks wit 70weight in the front, 80 weigh in the rear and stiff springs all round.
Fronts


Rears

However now the spring seats aren't limiting droop, the springs hit the front diff housing and that limits droop although to a lesser extent, so I will have to take it apart again and modify the front diff housing.

I made up some body mounts, the front ones aren't perfect though i should have made them taller, so I may well remake them.

I also replaced most of the M3 screws under 20mm long with some alloy ones I had laying around from another project, here's how it is looking now.




Hot Bodies Lightning 2 Pro carbon, Mega 22/30/2, MMM, 4s3-5Ah.
Tamiya F201 carbon, Mamba 7700, MM, 2s A123 2.3ah.
Xray XT8, 1518, MMM, 4s5Ah.
Lots of boats.
fastelectrics.net
   
Reply With Quote
Old
  (#3)
nativepaul
RC-Monster Aluminum
 
nativepaul's Avatar
 
Offline
Posts: 522
Join Date: Jan 2007
Location: Sussex, England.
03.26.2010, 04:31 PM

I finally got round to modifiying the front diff housing, the screw faces for the top clamping screws needed moving back 3.5mm, and there was just enough meat in the plastic to get that far back, another .2mm and I would have perforated the housing. I also had to shave off a strengthening rib, but with its placement in an allready high strength area I am not worried about having weakened it too much.


Now the springs just have a microscopic amount of clearance at full droop increasing as the wheels rise.


Hot Bodies Lightning 2 Pro carbon, Mega 22/30/2, MMM, 4s3-5Ah.
Tamiya F201 carbon, Mamba 7700, MM, 2s A123 2.3ah.
Xray XT8, 1518, MMM, 4s5Ah.
Lots of boats.
fastelectrics.net

Last edited by nativepaul; 03.26.2010 at 04:33 PM.
   
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump







Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com