SMC 20C 11.1V LiPo HArd case 37.74 Wh

[Unsullied_Spy]

http://eagletreesystems.com/MicroPower/micro.htm

You want the eLogger v3, I'd personally go for the 150A version with wire leads rather than Deans (I'm going to convert to EC5 connectors though). The 100 amp version is cheaper but we pull some serious peak amps through these things and the 100A will not be nearly as accurate at higher amperages (it will read 100+ but not accurately). The motor and ESC in your Flux are going to pull some serious burst amps, definitely over 100. I also believe that 20C 3400 mAH packs are a bit too small for use in the Flux but I am really interested in seeing how they hold up under the load of your Savvy, if they hold their own I have found myself some new lipos for my boats

[BrianG]

Amen to that, I've pulled 145A in a CRT.5 on 3s. I really wish they had a 200-250A model.

[Savage-Flux]

ok, its been a LONG time and im sorry, JUST got my transmitter back like 20 mins, ago, and now i cant seem to bind it back to the receiver. i have the Airtronics MX-Sport, im going to eliminator-rc right away, mabey they can help me. anyway, ill mabey make i vid tonight, if not, tommorrow for sure.

your from winnipeg?

[Savage-Flux]

Originally Posted by 88gtanotchback

your from winnipeg?

why yes i am! why, do you think you know me?

[suicideneil]

Necropost:

Ever do a video or get eagletree data from a run?

[Savage-Flux]

Originally Posted by suicideneil

Necropost:

Ever do a video or get eagletree data from a run?

no, i completley forgot about it, my rc season is in the summer, my truck i drive now is the savage X 4.6 the flux in the summer, and i also do model trains (HO Scale) in the winter, which all my work money is currently going towards.