roll cages??

[DwightSchrute]

does anyone know of a roll cage that will fit on the FLM 3905 chassis?

[DwightSchrute]

nobody? ....yeah...this one was a hard one to find.

this one works on the flm just for future reference. i found a guy on the web that uses it with great results.

http://store.vgracing.com/roll-cages...odel-3905.html

i got it on ebay for $40.

PEACE!

I was never a big fan of roll cages,I use heavy duty 7075 roll BARS as it usually takes more hits than a bunch of smaller rods,I'm sure it'll look good on an flm maxx though!--Josh

stay away from the tube/solid rod roll cages. One good crash and its DONE. Bends up easily. Sometimes the brazed joints are not very strong.

I had to take mine off because itt just started to look hideous

[Finnster]

Has anyone ever used the rollbars from New Era?

I know the thin rod roll cages bend and break welds easy, but I was wondering if something like this would hold up a bit better. I don't need a full cage, but I have a high mounted 1521 in my savage that I'd like to have some protection for from roof landings.

Originally Posted by Finnster

Has anyone ever used the rollbars from New Era?

I know the thin rod roll cages bend and break welds easy, but I was wondering if something like this would hold up a bit better. I don't need a full cage, but I have a high mounted 1521 in my savage that I'd like to have some protection for from roof landings.

have not used that one, but the bolt points are a lot closer to the actual roll cage so fundamentally this should be much stronger. Id purchase this! I also think there are plastic ones that would work well too.

[JAILBIRD]

Bondo has one on his LST. The pics look like it can take a beating and hold up.

-JB

[swiftneed]

Paralyzed is running his lst maybe he has a few ideas on the places to get one

[Kcaz25]

Paralyzed(harold) fit one of the RC-solution's NITRO cages on his 3906 FLM chassis. IIRC he just had to do alittle triming on the sides of the cage. It looked GOOD. I'll try to find it.

EDIT: FOUND IT! CLICK Shocker-->> it ends in an unexpected place. Noob infested, crazed mod infested, but safe. You guessed it.

[DwightSchrute]

Originally Posted by Kcaz25

Paralyzed(harold) fit one of the RC-solution's NITRO cages on his 3906 FLM chassis. IIRC he just had to do alittle triming on the sides of the cage. It looked GOOD. I'll try to find it.

EDIT: FOUND IT! CLICK Shocker-->> it ends in an unexpected place. Noob infested, crazed mod infested, but safe. You guessed it.

WOW...that's a BEAST. it looks like it might be a tight fit with Mike's battery trays though. do you know if he has any pics of it with batteries strapped in?