LOSI LST XXL Conversion ideas

[jpoprock]

Ok.. so just because they don't have a 3k weave that is 3mm thick listed, doesn't mean they don't have any right? I should email them I guess.

Looks like Ray did use 2.5 and 3mm on his project. I thought it was 2.5 all around. Now I need to go back and look at the thread to see what thickness he used on what.

They have some cool blue CF there, but it is like 4mm thick, and hard as a brick! Apparently, if it's too stiff.. that can be a bad thing. And I don't know what the rule of thumb is. You'd probl want a little bit of flex in the chassis. Do the towers and plates need a bit of flex too?

My guess is... 2.5mm or 3mm of any variety from that Ebay Store would be just fine. You could probl get by with 2mm if using that Texalium stuff.