Phoenix ICE HV Car Software

[Jahay]

i know there are a few niggles that are still to be sorted, but how long roughly does a couple of niggles generally take to sort out.. .and then after the niggles are sorted out... how long to bring to market? Just want a general idea of how long these things take :)

9s coming very soon i hope on my 1520. SHOULD BE RAAAAPPIIIDDD!!!!

[nuz69]

For jahay :
9 x 4,2V = 37,8V ^^ (when fully charged)
37,8 x 1600 = 60480 RPM !! I think you hit the RPM limits
In 8S : 53760 RPM.

[Jahay]

Originally Posted by nuz69

For jahay :
9 x 4,2V = 37,8V ^^ (when fully charged)
37,8 x 1600 = 60480 RPM !! I think you hit the RPM limits
In 8S : 53760 RPM.

That is true nuz but i calculate it using 3.7v as if the motor was under load. So then the result is 9x3.7= 53,280 which is well within the limit.

I have heard that a few people on here have pushed 10s quite comfortably.
So i thought 9s would be more than fine. Plus i wont be running 9s most of the time, mostly 6s or 7s. 9s will be for speed runs.

Wouldnt this be ok? i want to get the most from the motor... They are built well and should be able to handle it right? Or would i be better going 8s?

[nuz69]

I think that the 1520/1Y with 9S and 0% punch control will break the transmission instantly But that is what we like, overkill setups
Post new vids when you get this 12S ESC ! ;)