Brushless hpi baja rc-monster

[Arct1k]

Originally Posted by thomatrix

Only way I can see is to dremel away some of the area highlighted in the attached picture. If anyone has another approach please let me know!

Looks like its in there now - whats the issue? Motor wire attachement? Have you tried rotating the can to see if you can get the wires into a better position?

[thomatrix]

Originally Posted by Arct1k

Looks like its in there now - whats the issue? Motor wire attachement? Have you tried rotating the can to see if you can get the wires into a better position?

The images I posted earlier with the motor just placed (not attached yet) is of the 2215 and not the 2230 which is the real issue.

This is why I would like to know if Mike takes custom orders. I don't mind paying more as long as it works properly.

Originally Posted by thomatrix

The images I posted earlier with the motor just placed (not attached yet) is of the 2215 and not the 2230 which is the real issue.

This is why I would like to know if Mike takes custom orders. I don't mind paying more as long as it works properly.

It looks like you have a version of the 2230 with the front cooling fan, you might want to contact Neu to see if they can change/replace/trade it for a version without the front cooling fan. My 2230 does not have the fan, and it measures in at ~4.75" in length.

[thomatrix]

Originally Posted by billy gunn

It looks like you have a version of the 2230 with the front cooling fan, you might want to contact Neu to see if they can change/replace/trade it for a version without the front cooling fan. My 2230 does not have the fan, and it measures in at ~4.75" in length.

That could definitely be an option. I was not aware that there were two versions of the same motor as this is not described in any product materials.

I will try and give them a call later today. Thanks for the info!

[thomatrix]

Hi all,
it's been a while since there has been any activity here. I just wanted to let you know that I am by no means stuck with my two brushless bajas. A lot of time has passed with waiting for the Castle large scale ESC but I took the decision to go with the Schulze ESC's when they announced that the 12S version was further delayed. Anyway, here you have a few pics with all the parts. The Turnigy ESC is just put in there for fun - it burst into smoke and sparks after 3 minutes of use... Not all parts are in the pics but most major parts are there. The cars are partly disassembled.

I will start the build soon. There is cancer in the family (father-in-law) and he will not make it so time is not always a luxury I have with a busy job on the side. Anyway, here the pics. If you have made some video or pics of your cars please post them here or link to the site where you have it uploaded.

Talk to you all soon.

[thomatrix]

One more picture.

[thomatrix]

[YOUTUBE]bg7fBIsynkU[/YOUTUBE]