Wow, but not good...... - RC-Monster Forums

nitrostarter · 02.26.2006, 01:01 PM

I made sure I squeezed the trigger tight when I programmed it but I didnt worry about the EPA. I think I need to check that out.

Gustav · 02.26.2006, 01:10 PM

How many cells? and std or ue diffs?then we'll be able to say what speed it should be hitting on good cells.

Seems like the reason for the high temps may be that it's overgeared to compensate for only getting partial throttle.eg 7xl,14 cells,3.3:1 diffs on 18/51 is around 38mph.(44mph on stock diffs)

nitrostarter · 02.26.2006, 01:17 PM

16 cells, UE diffs, 16/51 now, 40 series Road Rage.

I use a Rx pack also.

I don't know, its just pretty depressing to see all 4 tires(standard bowties) balloon like saw blades only 1 time when I'm about to thermal.....

Gustav · 02.26.2006, 01:27 PM

Do you have the BK programming cable? maybe the timing could cause this?

I'd reprogram the controller with the epa 100% and the trims at 0.

seems a few mph short at 33mph(was that on 18/51?) but could just be voltage drop of the cells.

nitrostarter · 02.26.2006, 03:04 PM

:005: :005: :005:

I can't keep it in :020: . I just tried the 16/51 16cells, and I like the squirrelly driving caused by the excessive ballooning of standard size Bowties. Fellas, this is how its supposed to be(i think). She rolls like a batt out of hell and temps are down. I reprogrammed it and put the 16T on. I'm ready to radar it now. Going half throttle and nailing it will send her sliding on the body.