Krawlin's RC Room Clean Out Sale! Lots of stuff going for cheap, tires, parts, etc!

[Krawlin]

Alright guys I've got a bunch of stuff that should be useful to the RCM crowd, especially at these prices! I've been cleaning out my workshop and spare bedroom (aka the man cave/RC Room) and found a few things that I don't use anymore so I'm letting them go cheap! One man's stuff is another man's good deal!

Remember folks, I have all good dealings here. I also have 10 more 100% feedback on RCTech and 14 more 100% feedback on BYT and 25 more 100% feedback on Ebay. I take pride in my exceptional all 100% feedback so you can buy/trade with confidence!

I take PayPal only. Anything that says the price is the shipped price is to the lower 48 United States. I will ship internationally on your dime.

First up, LOTS OF TIRES!!!! I will sell these in sets of 4 except for the 1 pair that is there that are white dish wheels which don't match any of the others! I AM OPEN TO TRADES OF TIRES FOR SAVAGE PARTS AND MUGEN MBX5T PARTS!

We have 1 complete set of Proline CrimeFighters on Mugen spoked standard offset white wheels colored red (not by me, previous owner), these are lightly used and have 85% or better tread left! They are MT sized and the wheels use a 17mm hex, SOLD!

Next we have 1 complete set of Proline Bow Ties on white dish standard offset wheels, 2 have decals on them and 2 do not, all 4 are MT sized and use a 17mm hex, the tires each are worn a little funky but I'd say about 50% tread and better, SOLD!

Now we have a pair of Proline Holeshots on white dish wheels, standard offset, 17mm hex, and roughly 85% tread left! PM ME FOR PRICE! OBO (open to trades) (SEE PICTURE BELOW)

Next again in line are 5 complete sets of Proline Holeshots, 3 sets on are Proline LPR sized standard offset yellow dish wheels and 2 sets are on Kyosho MT sized spoked standard offset wheels (1 set yellow spoked and 1 set white spoked colored red by previous owner). I haven't owned a set of new holeshots before so I am giving a rough estimate of about 65% to 80% tread left on all of these sets of Holeshots! All wheels in the sets use a 17mm hex. Come and get em for PM ME FOR PRICE! OBO (open to trades) (SEE PICTURE BELOW)

Take a gander at these tires and post up saying which specific set you want and if you don't like my price make me a trade offer for Savage parts or Mugen MBX5T parts!

I will sell all of the tires shown in the picture below as a lot for (PM ME FOR PRICE!) shipped! Can't beat that deal if you need some practice tires!




Here we have 2 brand new T-Maxx 3.3 chassis that I had gotten from Ebay, they were pulled from a brand new truck, never used and I've never installed them on another truck.
PM ME FOR PRICE! THESE ARE BRAND NEW PARTS AND GOING EVEN CHEAPER THAN YOU CAN GET ON EBAY!!!

ALSO AVAILABLE! - A brand new once installed never used set of HPI Savage Flux stock TVP's, PM ME FOR PRICE!





Used Proline and used OFNA wings. Proline is the white wing and OFNA is the black high-downforce wing. Proline wing is in great condition, the OFNA one is pretty scratched up.
PM ME FOR PRICES! No pics because they look like plain old 1/8 wings. Pics available upon request.

Here we have a pair of OFNA billet front knuckles for the king pin suspension on the OFNA 9.5 series vehicles. These are very nice pieces and well machined, very sturdy. Used, they have some scratches.
PM ME FOR PRICE!




Next in line are a set of wheels/tires from a 3906 E-Maxx. These have had every other lug shaved off, Excellent mudding tires! 14mm hex, and 1 wheel has a small cracked/chipped spot. None of the hexes are stripped. Used and the chrome has come off in a few spots but they are still great for a basher! PM ME FOR PRICE!






Last for this post (more items will be in the next post) are 5 AM radios from RTR kits. All worked before being put into storage (upgraded to a better system). They are as follows...
- JR XR2i and JR 2 channel Receiver, the transmitter itself needs a thread on extendable antenna.
- AE XP3 and 4 channel receiver
- Two OFNA radios from OFNA RTR kits, not sure what model radio they are, both come with receivers
- Traxxas TQ3 with 3 position toggle switch for crawler rear steer and 3 channel receiver
PM ME FOR PRICES! GOING VERY VERY CHEAP TO GET THEM OUT OF THE WAY!




OFNA Buggy and OFNA Truggy will be listed in next post!

[Krawlin]

Now we have a couple of OFNA cars here, a Mutilator and an OFNA Ultra MBX Comp. Mutilator is almost a roller but missing stuff and has a broken part (will come with parts to fix it/fixed before shipping if requested) and the MBX Comp is only about 1/3 there. I just need these gone, they serve no purpose to me and I really don't need them sitting around giving me ideas for more projects, my loss your gain. They are dirty, used, and in need of some TLC. I was young and stupid years back and engraved my name in the Mutilator chassis, but that will be smoothed out with the dremel AND it comes with a brand new never used chassis for the Mutilator! For those who don't know, the Mutilator is based on the 9.5 platform, so if you have a 9.5 based buggy, your parts will work on this! The Mutilator also has a front Pillow Ball Suspension conversion robbed from the MBX Comp buggy. Also has front universals and rear CV's! Comes with the wheels and tires shown too!

Please get these trucks out of my hair, I only ask (PM ME FOR THE VERY VERY LOW PRICE WHICH INCLUDES SHIPPING!) for the pair!

Sorry that these vehicles look so terrible, I just need them gone and don't really have the time to bother with them anymore. They are going cheap because they are in the way. My loss and your gain.

I will also trade for Savage stuff!














Also I figured I might as well just throw this out there, anyone out there who is into model train stuff please PM me, I have ALOT of HO-scale model train stuff that I need to get rid of.

[brushlessboy16]

Wanna buy lst stuff, wayy better than savage stuff :)

[Krawlin]

No, because I have a Savage now. Interested only in trades for savage stuff.