RC-Monster Forums  

Go Back   RC-Monster Forums > Support Forums > Brushless

Reply
 
Thread Tools Rate Thread Display Modes
Uhm, is this a joke? .............
Old
  (#1)
Dj_Sparky
Guest
 
Posts: n/a
Uhm, is this a joke? ............. - 07.20.2011, 11:27 PM

http://www.fastelectrics.com/blmotors1.asp#NEU_Motors


FastElectrics Neu category is filled with these motors now;



Which are very similar to the Neu's.

They are claming "At max efficiency it makes 52% more torque & 48% more power than a typical 1521 package" for the 1521 "lookalike". They even claim that some of them produce 80% more torque than the Neu counterpart.

They seem to have "alternate versions" of 1415, 1509, 1512, 1515, 1521 or something along those lines. They all cost over 300$ as well.

Now, what I've already said is pretty outlandish, and sounds like a blatant joke, but there's more:

"Fastelectrics is a world leader in Neu motors and their selection for electric competition and research with organizations like CSIRO, Aerosonde and Universities of NSW and Melbourne.

Fastelectrics RACE motors make the best use possible of the high amp packs for an edge the others cant match

The specs are broad because we are not sharing our edge or the edge you purchase with the competition, who after all merely copy and hope."

So, they refuse to share the SPECS of the motors cause they don't want the customers to buy similar versions from competitors? Uhm, their entire line seems to be a direct ripoff of Neu and they seem to be proud of that fact...

"SPORT MARINE
Our sport marine motors are built using the same materials and on the same production line as the entire Neu range. Like our race series the Sport Marine motors are Kuhlered for trouble free running and so they look as sharp as a tack!

Fastelectrics’ Sport Marine motors are designed to deliver a combination of runtime and performance that blows cheap motors out of the water."

Now mind you I am quite sleep deprived at the moment, so I may have misunderstood it all, cause all that just goes beyond the realm of ridiculous.

And here's their "policy" on motors;

"fastelectrics.com's motor policy is to offer modelers the least expensive, best value, and the fastest motors."

Last edited by Dj_Sparky; 07.21.2011 at 12:58 AM.
   
Reply With Quote
Old
  (#2)
josh9mille
RC-Monster Aluminum
 
josh9mille's Avatar
 
Offline
Posts: 897
Join Date: Mar 2010
Location: Same town as "Brand P"
07.20.2011, 11:43 PM

Whats up with the carbon-fiber can? I dont think that helps with cooling at all......


Built Ford tough, with Chevy stuff.
   
Reply With Quote
Old
  (#3)
BrianG
RC-Monster Admin
 
BrianG's Avatar
 
Offline
Posts: 14,609
Join Date: Nov 2005
Location: Des Moines, IA
07.20.2011, 11:53 PM

At the efficiencies they are claiming, the motor could be wrapped in a wool blanket and not heat up.
  Send a message via Yahoo to BrianG Send a message via MSN to BrianG  
Reply With Quote
Old
  (#4)
aqwut
Brushless Heavy Weight....
 
aqwut's Avatar
 
Offline
Posts: 1,954
Join Date: Sep 2005
Location: Kingsville, Ontario
07.21.2011, 12:20 AM

Quote:
Originally Posted by BrianG View Post
At the efficiencies they are claiming, the motor could be wrapped in a wool blanket and not heat up.
LOL, it seems like more and more companies are claiming BS... We are at go for new Innovation, but there is a limit for reasonability..


The Power of BRUSHLESS!!!!!
http://www.geocities.com/aqwut
1HP (electric) = 746 Watts.
Everything is brushless!!
   
Reply With Quote
Old
  (#5)
pinkpanda3310
RC-Monster Titanium
 
pinkpanda3310's Avatar
 
Offline
Posts: 1,152
Join Date: Sep 2008
07.21.2011, 01:33 AM

They are listed as 'neu motors' and the carbon fibre cans are just water cooling jackets.

My guess is they have made an order with neu for a special wind and that is 'the edge'.

Also, is that hp rating continuous or surge because the neu motor spec chart says a 1521 produces 4.6hp surge whilst the fast elec one is 5hp. Motors are generally more efficient at lower temps aren't they, hence the difference.

Last edited by pinkpanda3310; 07.21.2011 at 01:43 AM.
   
Reply With Quote
Old
  (#6)
PBO
RC-Unobtainium
 
PBO's Avatar
 
Offline
Posts: 1,032
Join Date: Jul 2008
Location: Sydney
07.21.2011, 02:11 AM

Quote:
Originally Posted by pinkpanda3310 View Post
They are listed as 'neu motors' and the carbon fibre cans are just water cooling jackets.

My guess is they have made an order with neu for a special wind and that is 'the edge'.
Correct

Fast Electrics has been in boats for a long time & is moving toward RTR & ARTR. This is part of the overall development of the company - have a look at the new motor mounts, very nice clever stuff

I've bought 2 Neu's from Andrew plus batteries & associated stuff. I would recommend him 100% from these transactions but also because he genuinely knows his stuff


Enhanced Rustler 1515 1.5 MMM
Losi 8ight-T
   
Reply With Quote
Old
  (#7)
pinkpanda3310
RC-Monster Titanium
 
pinkpanda3310's Avatar
 
Offline
Posts: 1,152
Join Date: Sep 2008
07.21.2011, 02:55 AM

Trust you to know PBO

I don't disagree that fast electrics know there stuff.
   
Reply With Quote
Old
  (#8)
Brow
RC Drag racer
 
Brow's Avatar
 
Offline
Posts: 113
Join Date: May 2008
Location: Brisbane, Australia
07.21.2011, 03:25 AM

I will also vouch for Andrew. I have dealt with him and got real good service. I know he has played around with some custom stuff made by Neu to his specs in the past.
Looks like he might be getting motors made with very specific specs for boats.
   
Reply With Quote
Old
  (#9)
pinkpanda3310
RC-Monster Titanium
 
pinkpanda3310's Avatar
 
Offline
Posts: 1,152
Join Date: Sep 2008
07.21.2011, 05:35 AM

Notice it's the Aussies with positves? Fast electrics is the Australian distributor for Neu motors.
   
Reply With Quote
Old
  (#10)
Dj_Sparky
Guest
 
Posts: n/a
07.23.2011, 06:59 PM

Well if it's all legit I apologize.

It's just that.. how did he manage to up the power and torque by up to 50% and higher ? Better magnets or something? I would like to know how.
   
Reply With Quote
Old
  (#11)
Brow
RC Drag racer
 
Brow's Avatar
 
Offline
Posts: 113
Join Date: May 2008
Location: Brisbane, Australia
07.23.2011, 10:14 PM

I just had another look at the website and the boast is more power and torque than a "typical 15xx package", not necessarily a normal Neu motor so I think this might be a bit of marketing language too.
It would not be hard, I think, to find plenty of motors that can be beat by Neu by heaps in the power and torque dept's.
   
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump







Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com