4092 E-Muggy

[devious1]

Originally Posted by yzinger02

My 1518 is 1250kv and it runs good. Isnt the max rpm on the 4092 motors 30k?
If you don't have them already, aluminum diff cases will be very important. I broke the collar off the plastic one in the rear of my muggy with a 1518 and 6s

I will look into the diff cases

This is going to be my winter project as i am thinking about
putting paddles and ski's on my Wifes Rustler for winter...

30k is more or less for boaters.
I believe the rpm is still maxed out at 60k.
someone please correct me if i am wrong...

On a street/basher basis i try not to push the max rpm's anyhow as i would rather have reserve power if need be...

But i look at things as you can never have enough power and build to support the power you plan on running...

[steveo]

i also saw something about a max rpm of 30/35k and i dont know where, but why could it be bearings or rotor size. the 1717 is rated for 45k why not 60k? like the 1518 ind 1520

[nativepaul]

Originally Posted by devious1

30k is more or less for boaters.
I believe the rpm is still maxed out at 60k.
someone please correct me if i am wrong...

I'm a boater and I laugh derisively at any motor that maxes out at 30k RPM "ah aha ahaha aha", even my submerged drive mini ECO boat spins at over 35k.