I can't get my new align servos to work normally.

[el tomaso]

As said abowe, I can't get my new align servos to work normally in my new build.

The car is a Ve8, with flux 2650kv motor, waterproofed MMPro, Spektrum DX3.0 with the reciever that comes with it. The servos are ALIGN DS610, both on steering and mech breakes. I have done everyting I normally do when setting up a new car, re-checked every conection. The esc start and throttle works forward, and I set no reverse cause of the mech brakes. But that is how it should be. The servos however, do not respond to my inputs, they vibrate back and forth, sometimes they make a sudden big movement.

I have tried to elevate the antenna, checked all I can think of.

Any thoughts? I really wan't try my new Ve8 soon.

Thomas G

[el tomaso]

Of course the servos didn't work normally, the MMPro can't deliver enough juice for the servos. So, installing a bec fixed the problem

Thanks anyway. Now for the first run!!!!!

Thomas G