Bondo's 1:1 ZJ Scaler

[Bondonutz]

Heres pics of what I'm starting with, also showing how I'm going to join the pieces by sleeving the ends in each other. Each rail will also be plated on both sides with .32" brass strips once they are complete.

[nitrostarter]

Looks like you have a couple F-ups there. Might want to get that fixed...

Just kidding!! Can't wait to see more brass building!

[Bondonutz]

R3 2 spd trans
1.5 steelies
1.5 MT Baja's
Castle ESC
55T brushed(no clue which one yet?)
3s power
Castle BEC Pro
Dual Hitec Robot servosd/4WS
Hitec 5645 shift servo
Axial axle's
GH Alum Chubs & Spindles
Integy HD center shafts
Integy 129mm links
PL 92 Cherokee body

[Bondonutz]

Originally Posted by nitrostarter

Looks like you have a couple F-ups there. Might want to get that fixed...

Just kidding!! Can't wait to see more brass building!

I just noticed my hairy gut is in the bottom of the first picture, I hope Harold Saran Wraps is Monitor and Keyboard befor he gets worked up and sprays DNA all over. Who am I kidding, Hippie wouldn't let the baby pudding go to waste

[Semi Pro]

Originally Posted by Bondonutz

I just noticed my hairy gut is in the bottom of the first picture, I hope Harold Saran Wraps is Monitor and Keyboard befor he gets worked up and sprays DNA all over. Who am I kidding, Hippie wouldn't let the baby pudding go to waste

i would have never noticed........now im scarred for life

[Bondonutz]

Finished one of the rails today, plated with 3/32" and the bottom was plated also with 3/32x1/2" for skid protection and a little more weight down low.

One side done, need to get more 1/2x3/32" strips to finish second rail then
once I figure out exactly where the center skid is going and install the shock mounts I'll do the finishing soldering and when tima allows do the final mock up hopefully soon thereafter off to powder coating !

I'm open to comments and questions

[Bondonutz]

I completed the 2 rails and all the finish work on them today, heres a few pics. As you see these are not light weights LOL

Now on to making cross braces and figure out where the center skid is going ?























PIGS

[Bondonutz]

I think this is all I'm doing tonight, gonna catch up on my DVR movies and relax

[magman]

Brass is the new sexy!!

[Bondonutz]

Originally Posted by magman

Brass is the new sexy!!

Thanks Brian, maybe starting a trend who knows ?

On the Crawler forum the guys were coming up with brass related nicknames for me, I personally liked "BrassHole" the best. Might be the trucks name ?

[Bondonutz]

I kicked some major azz on this thing the last 24hrs, It's a ROLLER !
Onto the pics


What the heck is this thing you ask ?

[Bondonutz]

[Bondonutz]

[Bondonutz]

I still have to figure out where the trans shifter servo is going and install the rear steering servo mount. Also have to figure what I'm doing for a radio box and battery tray and where the hell their going ??
I think the battery will ride shotgun next to the trans parallel with the frame.

Plenty to do yet, once the mock up is complete I will dissasemble everything and deanodize the colored aliuminum piecse and then decide weither I get it powder coated or try the brass aging/tarnishing chemical I bought ?

[_paralyzed_]

Originally Posted by Bondonutz

R3 2 spd trans

Dual Hitec Robot servosd/4WS

we got a badass here... this guys runnin' ROBOT servos