Ofna/Hobao17mm big bores on a truggy

[CerberusVI]

Yeah I was talking about the 16s. I haven't bought any 17s was just curious. I'm running the 16s on my mbx5t conversion. I'm running stock pistons, silver springs and 35w oil and they seem really soft still. I have to set the preload almost bottomed out to make the arms and cvds sit level. I guess I'll have to try the smaller pistons and some thicker oil

[Thirdgen89GTA]

Originally Posted by CerberusVI

Yeah I was talking about the 16s. I haven't bought any 17s was just curious. I'm running the 16s on my mbx5t conversion. I'm running stock pistons, silver springs and 35w oil and they seem really soft still. I have to set the preload almost bottomed out to make the arms and cvds sit level. I guess I'll have to try the smaller pistons and some thicker oil

I'm using the associated front Bronze springs, and the AE rear brown springs.

They were alot harder than the blue ofna springs.

Bronze (fr)= 4.74lb/in
Brown (rr) = 4.09lb/in.

The truggy weighs in at 10.5lbs with twin 3S 5000mah batteries and a MMM/1515 setup.