Wiring Cap pack parallel to ESC wires?

[ruudxd]

Ok, thanks guys!
So the best is to solder wires as close to the ESC as possible to have the shortest wire length?
Or would it be better to build a cap bank that has an extra cap or two to reduce the extra length of wire?

[Pdelcast]

Originally Posted by ruudxd

Ok, thanks guys!
So the best is to solder wires as close to the ESC as possible to have the shortest wire length?
Or would it be better to build a cap bank that has an extra cap or two to reduce the extra length of wire?

Either is acceptable. Whatever is easier in your installation.

[ruudxd]

Ok, I will take a look at the cost of some good caps.
Thanks a lot for the help!

[ruudxd]

Sorry to bother you again, but I did some other research on a Dutch forum, and found out that boating guys use cap packs to, like this one:

http://www.tfl-hobby.de/product_info...3-000--f-.html

But does anyone know why they can use thinner wires?
The wires on the pictures don't look like 10 gauge wire, but the ESC's I have seen used are 220 amp ETTI's, Castle's etc?
Not that I do not trust you guys, I deffinetly trust you guys, and appreactiate the tips and advice, but I was just qourius?