glitching ??

[gmo]

hey guys, i just got my sspeed mod installed and was going to run it. but have a weird problem, while turned on for/rev is ok but the truck glitches like crazy when im handling it .like when i turn it upside down itll start throttle jerking, and even the steering servo will react on its own.i unplugged the servo and she still jumps, everythings tight, should i just try reciever locations or is this a common novak issue? :002: any feedback would be helpful.....thnx gmo...

[HotnCold]

check to make sure that your receiver antenna wire is not near metal - if so - isolate with a piece of fuel tubing to keep wire from metal.... Thats a start -

[gmo]

yeah, its not. i have the stock chassis..

[HotnCold]

i've never heard of the novaks doing this - i guess changing locations on the receiver wouldnt hurt. It only does this when you are holding it - not when it is on the ground or running on the ground. Weird to say the least...

[Gustav]

You must be very conductive,you could try wearing rubber gloves.

[coolhandcountry]

If it don't do it while the rc is on the ground I wouldn't worry about it.

are you running a ubec pack

[coolhandcountry]

I run the ubec yes. I do have a problem some time if to close to the rc with the radio.

just thinking if the battries are low that would also cause it to glitch

or the ubec i low