Mounting ESC in Stampede????

Does anyone have an easy way to mount the Warrior ESC in a Stampede? I would like to run the motor wires through the shock tower to keep them away from the shocks but that seems like the power leads will be right next to the antenna wire. I think I've come up with a way to do it but I'd like to see if anyone has a suggestion that would better hold it.

[RCcarnut]

When I mounted a schulze 18.61k in my pede, which is similar to the warrior in shape, I just ran the wires in between the shock tower and shock on the side the motor wires were coming from.

I had to mount it a little diagonal but it sat right where the stock ESC/MSC goes just fine and was never near the antenna.

[phildogg]

Originally posted by RCcarnut
When I mounted a schulze 18.61k in my pede, which is similar to the warrior in shape, I just ran the wires in between the shock tower and shock on the side the motor wires were coming from.

I had to mount it a little diagonal but it sat right where the stock ESC/MSC goes just fine and was never near the antenna.

thats about how I had mine mounted in my rusty. wasn't even close to my attena.
phil

[Quebecois_Sti]

check over here,
http://www.swami-rc.com/HackerInstall.htm

i think you will get idea