center diff conversion

[coolhandcountry]

Let me know if you need a test dummy. I can be dumb at time don't mind testing either. :LOL:

[RC-Monster Mike]

LOL. I have a test dummy or two, but I will keep you in mind!

[crazyjr]

Hey Mike. From what i see on Starscream's setup, you couldn't run you're single speed plate. The diff is too long, but if FLM can do a tranny case with a drop-out bottom you could get to the diff with a minium of screws

[RC-Monster Mike]

Even on the full size tranny, the bearing holes would need to be adjusted, and a diff won't fit into the width of the single speed. I thought about designing a diff to fit into the single speed SIZED case-the case itself would need to be custom. I may still give it a whirl.