Quote:
|
Originally Posted by neweuser
I would love to send you a pic of the inside, i know there are adjusters (2 I believe) but my camera sucks at close ups. Anywho, my resistors are about a 1/2 inch apart and right under the fan on the PS. So I think they are ok. If I add one to another set of 5v lines, would that hurt anything?
The 989 can do 10s and has the 10amp PS, I know that it's not adjustable though. You are looking for an adjustable PS?
|
Just because I have a pic doesn't mean I know which one does what. I'm not a god you know. :dft012: One of my converted PS units had two pots. What I did is attach a meter to the 12v line and S L O W L Y turned one of the pots and watched for a change in voltage. If there was none, I returned the pot back to the exact setting it was at before I adjusted it. In my case, one pot was an adjustment for the voltages (it adjusted them all up or down a few hundred mV), the other I still don't know what it does.
Threaded Mode
