1/8th scale difs

[auto2]

few questions for ya;


I see a LOT of MBX5 new difs on ebay for pennies.
Will they go into the bulkless conversions?


are there any bad points about bulkless?
( like a siezed hinge pin)

with 1/8 scale dif what center shaft is used?

[Serum]

Yes, these diffs should fit them perfect.

The savage diff is too big though, (ringgear issue) but these 1/8th diffs should fit.

The shafts you can use are the MIP's /UE's or any other brand cvd/drivebone. you can't use the stock driveshafts though.

The hingepins that have got another size, are included with the bulkless conversion. (make sure to get the 1/8th though, there are two different sets..) I guess you allready found that out..

The UE diffs won't fit them though. (need a little tweaking to make them fit..) The drivecups are simple too big for the holes..

[auto2]

good news and bad news;

I won the bulkless conversion but I lost both auctions for the difs by 0 cents! yup you heard it 0 cents.


it's Ok I'll find some diffs sooner or later.
;)

[auto2]

well mbx5 difs do not fit. dia of gear is too large.

back to step one.

anyone have 2 used/new 1/8 scale difs for me?

7.5's or GS storm or whatever you guys use.....

[Serum]

Don't fit?! that's weird... it's the same ringgear as on the UE 6spiders? the HB lightning ringgear/pinion should fit.. (though i seriously thought these would fit too) the HB ringgear/pinion is 43/10 instead of 43/13.

What numbers are on the package of those bulks?

[auto2]

http://cgi.ebay.com/ws/eBayISAPI.dll...EAFB%3AIT&rd=1

FLM18700

I just got 2 hyper 7 pro difs off ebay.