My next "project"

[squeeforever]

Yea. I had never thought about what I had in it until I thought of all the parts I bought...

[sjcrss]

I think that goes for the majority of us ....at least for me that is.....

[Procharged5.0]

Goes for me too...................and I'm not done yet! Ouch!

[maXXler]

This is the problem nobody wants to think about while building up a truck, ....me too:p

[squeeforever]

Ok, well I thought yall might like an update. Today I got my last items needed...or so I thought...Now I need a new motor mount/diff holder since the batteries hit the stocker. I'm gonna lower it a little less than 1cm so I can use a Ofna 51T spur instead of the 65T (would hit the batteries as well) and I'm gonna put the motor in the center between the braces. The CG will remain the same actually and will balance the truck better. I think it should be a better setup...I just can't imagine why they didn't do the same...Another thing wrong with the stock is that the shoulder that holds the bearing is less than 1mm thick (it's more like .5mm) and on the back holder/motor mount was starting to crack...So I'm gonna have to make it thicker as well...Not biggie really...Just puts me back a little on running it. I should have pictures soon though, with or without the motor and diff in it...I also got all the axles converted to 8mm and have Dace hubs, etc. I also did a few other mods...as well as a new shell and a new wing, etc.

[GorillaMaxx360]

Found this few month old thread but after reading this i got to see a picture of this thing it sounds amazing.

[squeeforever]

Thanks! I still need to get the center diff/motor mount machined, but after that its completely RTR. I think I'm gonna try to get it machined it in the next week or two...

[GorillaMaxx360]

Can i please see a pic.

[squeeforever]

I'll see if I can find one for ya...

Edit: Well I can't seem to find any of my pictures...Guess I'll have to take some :p. I should have them later today.

[Sylvester]

Hey squee.. what is bpp's website?

I want to email them and see what they want for one of their chassis.

[squeeforever]

Sorry, thats confidential...:D

http://bomb-proofproducts.com/

[GorillaMaxx360]

is this the picture on the website front also i cant get any farther on the website than the front page.

Click "home".

[squeeforever]

The home button doesn't show up on mine, and I'm guessing his...Just go here instead: http://www.bomb-proofproducts.com/home

Yea, there is a picture on there website, but theres is in aluminum, mine is CF. I think I can find a link to some later. (I would have gotten some pictures by now, but this is the first time I have been home since yesterday afternoon.)

[squeeforever]

http://visionarycomputer.net/rc/elsp/