Need help with buggy conversion

Hey guys,

I just wanted to thank all of those that took the time to give advise and share their experiences with me on this project. For better or worse, I've settled on a setup to start off with. Luckily, it turns out that there are optional aluminum center diff mounts for my buggy, so I'm just going to mount the motor mount to the center diff at four points. This should be sufficient and I won't have to worry about chassis flex.

My setup is going to be:

Sportwerks Turmoil 1/8 scale buggy
Feigao 7XL motor
Mamba Max controller
Maxamps 4S2P 6Ah battery packs

This setup should pretty much duplicate my buggy's weight distribution before the conversion. I hope to have this up and running within a week of receiving the aluminum that I ordered.

Thanks again.