Question on parameters of load

[Pierre]

Hello
I come of bought an infinity 3 but I do not know how parametrized the load of my batteries
intellect 3800 16 ells
chg curr : ? A
dchg curr : ? A
dchg volt : ? V/C
peak sens : ? V/C
cut-temp : ? °C
max-cap : ? %
peak delay : ? min
trickle : ?

and

lipo 3S 1300
chg.curr : ? A
dchg.curr : ? A
dch.volt : ? V/C
cut-temp: ? °C
max.cap : ? %

Thank you very much of your help
bye

[jollyjumper]

Originally Posted by Pierre

Hello
I come of bought an infinity 3 but I do not know how parametrized the load of my batteries
intellect 3800 16 ells
chg curr : ? 5amp
dchg curr : ? as much as possible
dchg volt : ? 0.9V/C
peak sens : ? as low as possible V/C
cut-temp : ? °C
max-cap : ? 100%
peak delay : ? 0min
trickle : never trickle ni-mh.

and

lipo 3S 1300
chg.curr : ? 1c= 1.3amp
dchg.curr : ? do not discharge
dch.volt : ? V/C
cut-temp: ? °C
max.cap : ? 100%

Thank you very much of your help
bye

hope this is good.

[Pierre]

thanks
intellect 3800 16 ells
chg curr : 5amp
dchg curr : 5amp (as much as possible)
dchg volt : 0.9V/C
peak sens : ZEROpk (as low as possible V/C )
cut-temp : 45°C
max-cap : 100%
peak delay : 1min
trickle : OFF (never trickle ni-mh.)

and

lipo 3S 1300
chg.curr : 1c= 1.3amp
dchg.curr : do not discharge
dch.volt : 0V/C
cut-temp: 45°C
max.cap : 100%

Of that thinks of it you?

[jollyjumper]

sounds good to me, but i'm no real IB or lipo expert.

maybe some one else can correct me if i'm saying wrong stuff???