More "SCT" motors

[Pdelcast]

Originally Posted by coreyfro

Would such a motor be ROAR legal for 1/10th 4x4 SCT? I've got a monster.

ROAR rules state that the motor must be 53.00mm in length or shorter.

So, it wouldn't be ROAR legal.

[jhautz]

Patrick, Any idea when the 1410 and 1412 motors will be offered without the ESC combo? I'm all set on ESCs but would really like to get the motors by themselves.

[ta_man]

1410 motor has a 1/8" output shaft and I believe you mentioned that this was for ROAR requirements. I didn't take the motor apart to measure it but the bearing looks like it could accomodate a 5MM output shaft. If you offer rebuild kits for the 1410, would there be an option of a 5MM output shaft?

I have no concern about the 1/8" shaft in a car with a slipper, but in a CRT.5/SCRT10 or similar car with direct drive and exposed gears, I would be concerned that a stone in the gear could snap the 1/8" shaft (actually heard 2nd hand reports on RCTech of people snapping these shafts). Then you would have to replace the rotor anyway, so why not do it right away with a 5MM output shaft rotor?

[jhautz]

+1 on the 5mm shaft request. I too would prefer 5mm shaft if it was available. Even a 4mm shaft would be preferable to the 1/8".

[jhautz]

Side note... I ran the 1410 motor yesterday at the track for the first time in my SCRT and I gotta say its is a seriously great bang for your buck motor. Felt even more powerful than the HV4.5 motor I was running and it ran cool and smooth. Very impressed with the whole SCT 1410/sidewinder combo. The esc handled running the 6.2lb truck with no issues at all. I cant imagine how you actually did it but for $120 (less in many places) this thing absolutely rocks. Really looking forward to the 1412 version of this motor. (But please don't make me buy a MMP to get one...)

[littlejohn]

Can these 4 pole motors be driven by a RS Pro?

[jhautz]

Don't see why not. I've used an rspro to drive a Neu 1512 4 pole motor with no issue. The 1410 wont be any different.

[littlejohn]

Thanks... does anyone know if CC will be making sensored motors in the near future?
Like a sensored 4 pole would be TOPS..

[simplechamp]

Originally Posted by rootar

we need more power on 7.4 volts altough im sure thats an amzing 3s setup its just not what we need.

Who is this "we" you speak of, LOL! Just joking around, I know who you refer to and the point you make. But there are a lot of bashers out there too, and people involved in unregulated, unlimited racing. I'm sure Castle does their best to develop products so many people can use them, that's how they make money. So while you may say we need something else, a whole other group says that's exactly what we needed.

[phatmonk]

So exactly how long is the motor with the MMP SC system.53mm or less?

[jhautz]

I did some experimenting today with the 1410 SCT motor in my Losi 810 buggy. This little motor is a freakin beast!! It ran like a raped ape on 3s with a different ESC. Ran a couple full practice packs on it and never saw temps over 140 degrees. Also ran it in some racing later in the day and after a 6 minute qualifier and a couple minutes of warm up laps it came off at 138 degrees. Broke in the main so I didnt get to see how it did there but Im sure it woulda been fine. This thing blew the Novak HV motor I was running completely out of the water. Not even a contest.

Dont know how you did it Castle, but DMAN this is a good motor for the money!! Nice work!!!!!!! Only wish I have, like others have asked, is for a version with a 5mm shaft and this would be a perfect motor.

[Pdelcast]

Originally Posted by phatmonk

So exactly how long is the motor with the MMP SC system.53mm or less?

52.95mm. It has already been accepted by ROAR for SCT racing.

[jhautz]

Patrick.

Any chace of a 5mm shaft version of the 1410 and 1412?

[snellemin]

Originally Posted by jhautz

Patrick.

Any chace of a 5mm shaft version of the 1410 and 1412?

I asked this before and got no answer so far.

[samintrepid]

I have the new stampede 4x4 and i want put the sct combo MMP 2400 but with 4S lipo the truck are pretty heavy or i do wait for the next sct combo MMM 4800 2S lipo. which combo are the best for this truck (more efficiency) ? thank !