What's up with the Lehners?

Hi all, I'm also had problem with BK and, after some months, I've deleted the order and got the money back.

The new Lehner Motors distributor is Hydro Marine. Their site is german only but they replied me throuhg emails very quickly.

I've ordered a new motor three weeks ago (I'm live in Italy) and it should be on shipping just in this days.

I'll keep You informed.

Bye

[gyn77]

Originally Posted by andreazinno

Hi all, I'm also had problem with BK and, after some months, I've deleted the order and got the money back.

The new Lehner Motors distributor is Hydro Marine. Their site is german only but they replied me throuhg emails very quickly.

I've ordered a new motor three weeks ago (I'm live in Italy) and it should be on shipping just in this days.

I'll keep You informed.

Bye

My experience with Lenher was very bad.
I waited for a lehner from BK for 5 months and then I erase my order.
I know that official LMT distributor is now Hydromarine and I wrote them to order a 1950 about 20 days ago, but not replay.
I'm very angry and disappointed from them.

Hi Andrea, I live in Rome too.... :018:
In che zona sei? Io in zona prenestina, spesso vado a girare con un mio amico in un piazzale all'eur.
Che mezzo hai? Come è motorizzato?
Qualche volta ci si potrebbe incontrare per girare insieme.

Hi all, yesterday my Lehner 1940/7 is arrived, so I can confirm that the new Lehner distributor is by far better than BK Electronics. Besides, thanks to Lehner production process, I've been able to get a custom 1940 with a 5mm axle instead the standard 3,17mm or 4mm diameter.

Bye

[jhautz]

Originally Posted by andreazinno

Hi all, yesterday my Lehner 1940/7 is arrived, so I can confirm that the new Lehner distributor is by far better than BK Electronics. Besides, thanks to Lehner production process, I've been able to get a custom 1940 with a 5mm axle instead the standard 3,17mm or 4mm diameter.

Bye

Spo how do you like your 1940/7? I have the same motor (4mm shaft) and its my favorite.

Lets see some video! :027:

I'm hoping that the Nue will be all that I need. The only reason that the Lehners are even a consideration for me is because they run well with the MM controller. If the MM/Neu issue were to be "fixed," I wouldn't care if the Lehner wasn't around at all any more.

[Dafni]

Originally Posted by AAngel

I'm hoping that the Nue will be all that I need. The only reason that the Lehners are even a consideration for me is because they run well with the MM controller. If the MM/Neu issue were to be "fixed," I wouldn't care if the Lehner wasn't around at all any more.

You're not alone with that opinion. If only we had more choices on contollers to run those nice NEUs. I'm fed up with Quark at the moment...

[Serum]

Please share your quark experiences Daf..!

[Dafni]

Nothing new, just the usual "it will thermal after a few minutes if you don't modify it for better heat transport" symptom.

The latest one we had was pathetic... 60°C on the outside - thermal! :032:

And on one (this one was fine for a long time) I think the heat pad got loose after a crash or whatever, but it suddenly started to thermal on me.

And then I had the one with the blown caps too. Just today I sent another box back to S&T.

I guess some are worse than others, and you can add extra caps and all, but I'd rather not mess with this stuff on setups I just sell on. Stick to 4S in the meantime, buy a MM, and hope someone will release a beefy ESC soon, one with Castle features and Neu capability please :)

[captain harlock]

Team Tekin, anyone?

[Rich Racer]

What's the goods on team Tekin??

andreazinno,

I see that it took about one month for you to receive your motor. Of coure, you are in Europe, so delivery would be faster to you. I would just like it ask if the one month wait that you experienced was due to your special order of the 5mm shaft. Do you know how long the wait would have been for you if you had just ordered a motor with a 4mm shaft?

Considering that the Neu motors require relatively expensive controllers, the Lehner motors seem like the best choice for a good motor.

Originally Posted by AAngel

andreazinno,

I see that it took about one month for you to receive your motor. Of coure, you are in Europe, so delivery would be faster to you. I would just like it ask if the one month wait that you experienced was due to your special order of the 5mm shaft. Do you know how long the wait would have been for you if you had just ordered a motor with a 4mm shaft?

Considering that the Neu motors require relatively expensive controllers, the Lehner motors seem like the best choice for a good motor.

Hi Angel, the problem is that Lehner builds the motor just on-demand. When You put the order to the Hydro&Marine, they send the order (whatever it is for a "stock" motor or modified by special request, like the mine for a 5mm axle) the first friday after the order date, then Lehner took two weeks to built the motor and the, finally, the motor will be shipped.

Bye

[captain harlock]

Guys!

VERY GOOD NEWS!!!

Mike will be carrying the Lehners once again- FlightPower is the new distributor of Lehner Motoren and Mike said they're working to support him with the lehners. He says it's a matter of weeks befor they become instock!

I'm glad he's able to restock them again.

I think he'll be carrying a full line of FlightPower's lipo packs.

[BP-Revo]

Originally Posted by captain harlock

Guys!

VERY GOOD NEWS!!!

Mike will be carrying the Lehners once again- FlightPower is the new distributor of Lehner Motoren and Mike said they're working to support him with the lehners. He says it's a matter of weeks befor they become instock!

I'm glad he's able to restock them again.

I think he'll be carrying a full line of FlightPower's lipo packs.

Wow...best news I've heard in just about forever. I've been waiting for my 1950 for about 8 months now and my 1530 for about 3.

[Serum]

Awesome, thanks for the update Alawi!