More "SCT" motors

[Pdelcast]

Originally Posted by phatmonk

Since Neu uses the same 1515 rotor in the 1415 is the castle 1415 1y able to use a Monster 1515 1y rotor.Yea i know the kv values are different.I bought the MMP SC combo sold the ESC and end up paying 40 bucks for a new 1415 1y.I love pee bay.

Nno -- we used a little different rotor in the 1415 -- it's a little smaller in diameter than the 1515 rotor.

It was more expensive for the tooling, but we got better performance. This way we have more room for copper in the windings.

Thanx!

Patrick

[phatmonk]

Cool thanks.I was just curious if any parts were interchangeable.This CC 1415 is gonna go in my Slash 4x4 on 4s with the MMP I allready have in there.

Can anyone confirm the shaft size on the 2400kv motor ?

Cheers

[jhautz]

1/8" shaft. Saw one with the MMP SCT combo at the LHS.

I guess Patrick is intensionally ignoring the question of if it is possible that 5mm shaft versions of these motors might be offered in the future. would really like to see that.

[Pdelcast]

Originally Posted by jhautz

1/8" shaft. Saw one with the MMP SCT combo at the LHS.

I guess Patrick is intensionally ignoring the question of if it is possible that 5mm shaft versions of these motors might be offered in the future. would really like to see that.

Yeah -- the shaft through the motor is 5mm, and it's turned down to 3.15mm so standard pinions can be used.

If there is enough interest, we could do a 5mm shaft version.

Thanx!

[jhautz]

I'd take one of each w a 5mm shaft!!

[ta_man]

Originally Posted by Pdelcast

Yeah -- the shaft through the motor is 5mm, and it's turned down to 3.15mm so standard pinions can be used.

If there is enough interest, we could do a 5mm shaft version.

Thanx!

How about a 5MM shaft motor maintenance package with replacement rotor? (for 1406, 1410, 1415)

[Pdelcast]

Originally Posted by ta_man

How about a 5MM shaft motor maintenance package with replacement rotor? (for 1406, 1410, 1415)

ooooh... good idea. Option rotor.

+1 vote for 5mm

I'm running a Lehner Basic XXL with a 4mm shaft. I am using 5mm pinions and a 4mm to 5mm sleeve. Hell, I'm running a Lehner 1530-8Turn in my E-Revo 1/16th. I have 4mm pinions for all my rides ;-)

I bore all my 48p pinions myself. I put 3.15mm pinions in the chuck of my drill press, and I press them on to a 5/32" drill bit held in a vice.

Originally Posted by Pdelcast

Yeah -- the shaft through the motor is 5mm, and it's turned down to 3.15mm so standard pinions can be used.

If there is enough interest, we could do a 5mm shaft version.

Thanx!

[samintrepid]

In how much time Patrick the Mamba Monster and 4800kv motor will be release ? and what motor are the best for stampede 4x4 (3lbs truck without battery) : 4800kv on 2S lipo or 2400kv on 4S lipo ?

Thank !

[bdebde]

5mm shaft would be nice on the 1410 and 1415.

[snellemin]

ah finally an answer.

[phatmonk]

Ditto Option Rotor.And all my pinions are 5mm bore.Luckily I have the TRX extra pinions.I wouldnt mind trying the 1415 in my SC8E though.

[scarletboa]

another ditto on the 5mm shaft. i have a 1410 going in my crt .5 and the last thing i want to do is break the motor shaft. my pinions are all also 5mm bore, but a simple bore reducer fixes that. it's the breakage i'm worried about.

[kingdomracer]

Yea, sign me up for 5mm option rotors for each.