Who Can rebuild Lipos?

[brushlessboy16]

I just peaked mine, still waiting on my v3 to arrive so i can test it..

[mikey09120]

Originally Posted by lincpimp

Should not be an issue. What brand packs are they? I would break them down into 2 sets of 4 cells and make the packs from there. The cells of each 4s pack are matched so they will make a good basis for the 2s2p packs you want. Pm me for info if you like. I have traxxas connectors and will set you up with a single 2s balance connector per pack. I also have black shrink...

they are the zippy 4s 4400maH 15C
these
how much will my wallet hurt?
and they would be 2s 8800maH 30C with female traxxas connectors and black shrink. if possible could you make the length of the wire from the batt to the connector as short as possible.
srry for all the details

[lincpimp]

Originally Posted by mikey09120

they are the zippy 4s 4400maH 15C
these
how much will my wallet hurt?
and they would be 2s 8800maH 30C with female traxxas connectors and black shrink. if possible could you make the length of the wire from the batt to the connector as short as possible.
srry for all the details

The c rating will not change, so they will be 2s2p config with 8800mah and 15c rating. So good for 132amp cont discharge. Total cost would be around 40 bucks plus return shipping cost...

[mikey09120]

Originally Posted by lincpimp

The c rating will not change, so they will be 2s2p config with 8800mah and 15c rating. So good for 132amp cont discharge. Total cost would be around 40 bucks plus return shipping cost...

k thanx. well talk soon