Looking for Closure Neu/Castle 2200kv

[Mentat]

This all stems from me really not knowing if my castle/neu 2200kv is bad. Im using 48t/16t gearing and I ran 2 lipos packs thru (the engine has less then 1 hour total run time). First was a 4s1p 5000mah pack ran it out and the engine wasnt really all that hot. I then put in the 5s1p and ran it around for a few mins, then stopped it for a few mins, then ran a few mins more. it was so hot that near the end of the pack that my spit would evaporate in just a few seconds 5 or so. Now keep in mind that i didnt run it full bore the whole time it we be run for 5 mins or so then we would let it rest and do something else for a while. I have spent most of my time today here posting and trying to decide what i should do. I ordered a 10t and 13t pinion to have gearing options. Is it safe to say that the engine is TOAST? I just want some def closure lol. I havent ran it since how can i tell its bad?

yes i have made about 15 posts today.