charger ???????'s

need a good charger , 1 that charges up to 6000 mah and does 2c charges . what do you guys recomend ?

[Metallover]

I love my Hyperion. I have the 0610i which does up to 6 cells at 10a at 250w. Wattage is what you need for large packs. 22.2v(12a)=266.4 watts. Make sure your power supply is up to it too.

Also look at the TP1010c, FMA chargers, and a few others.

[bdebde]

Check out the Ichargers, I just got one and it is great.

[magman]

Originally Posted by bdebde

Check out the Ichargers, I just got one and it is great.

Just looked at those and the 20A model would be sweet if it could do 2 batts at once. With 20A and 350W it should be able to handle it, but, the programming is probably not set up for it.

The chargers look nice though

[bdebde]

The balancer boards (sold seperately) allow up to the max cell charging; 2 x 3s on 6s model and 2 x 4s on 8s model and so on, just need a y cable on the main lead.

[hoober]

Originally Posted by anthony213

need a good charger , 1 that charges up to 6000 mah and does 2c charges . what do you guys recomend ?

12 amps is what you spec. If you'll put up with 10 amps (there's many chargers with a 10 amp limit) then for 2S you may like the 989 MRC superbrain. For 3S you might like the Checkpoint TC 1030. There are also many Chinese chargers that will do 2-6S at 10 amps. (i-chargers are one)

Originally Posted by hoober

12 amps is what you spec. If you'll put up with 10 amps (there's many chargers with a 10 amp limit) then for 2S you may like the 989 MRC superbrain. For 3S you might like the Checkpoint TC 1030. There are also many Chinese chargers that will do 2-6S at 10 amps. (i-chargers are one)

Alot of the lipo battery companies say not to use the MRC chargers because they don`t use the constant current/constant voltage standard of charging