Another LST XXL Conversion

Hi everyone,

After following MC's XXL build since the start i bought a XXL roller and converted it. It has gone through a few stages so i'll give you a brief history.

To begin with i converted it by using the losi conversion kit. I had many issues with this kit but the main ones were the motor mount and the battery tray.

After that i made my own battery tray and placed it between the tranny and the RX box/steering servo. For this stage i was still using the Losi motor mount.

I then made my own motor mount out of 3mm thick ally angle.

After this i lost interest in my XXL and thought about selling it. However i thought about MC's build and decide i would do a similar build myself. So over the past 4~6 weeks (thanks school hols) i made a somewhat custom chassis. I know that many of the ideas used for my conversion (if not all) are form other people but i'm not sure if someone has done a build exactly like mine.

I will start to upload pics soon as i will copy them from the original thread on a different forum.

This is the original thread if anyone wants to read pages and pages of random waffle. http://www.ausrc.com/forum/showthrea...XXL-Conversion

Thanks,
B-M