For Sale: Carbon Fiber Chassis blank with molded 7* kickup.

[Ryu James]

Here is a very nice chassis blank. I used these for years to make carbon chassis. Carbon was constructed with the 7* angle, which fits almost every RC except Losi as they run a bit steeper kick up.

Carbon is 1mm weave in matte finish. 3.5mm thick, which is optimal for strength and flex. I built so many of these in different thicknesses and 3.5mm proved to be perfect for allowing some flex. Any thicker and the car would jump all weird because the chassis was too stiff.

This will work for 1/8 buggies, and SC trucks. Dimensions are 17" x 10", plus enough extra to make shock towers or something similar. Might be too short for a truggy chassis

PM please.