PIF maxx project

[BP-Revo]

Harold if you decide to make it a 3906 I got some chassis braces for one lying around, as well as 4 3906 shocks (brand new).

[BL_RV0]

Harold I replied to your PM. I already got the rest of the stuff packed (4 shocks, crapload of springs, titan motors, battery hold downs, couple a-arms, alum diff collar, etc.) and I'll do my best to get my ass to the post office today....

[_paralyzed_]

cool. I'm excited to get this build started...

[BL_RV0]

I'm excited to see it finished.

[C-5Quad]

I have a brand new never run evx2 out of my 3905 Ill put in the project just pm me your address. All I ask is that you consider donating to http://www.shepherd.org/ they help tons of children and adults that suffer from spinal cord injuries and brain injuries throughout the US including my self and I'd love to help give a little back to them.

Instead of selling the maxx we could set it up like mine..Im a quadriplegic so my hands dont work....I use a cheep flight controler and have it set so the right stick does everything.....forward..rev..left..right....

I just use my palm to drive the truck with the controler in my lap...

I think the kids would have a blast driving it in the gym there just on cheep nimh 6 cell packs....plus it will show them they can still do fun things

ok my rant is over......its just an idea....either way Im in

[_paralyzed_]

well guys.....

If I'm gonna build this and it's going to be associated with RCM in anyway it has to be done right. I'm talking LST diffs, possibly a CD, it's gotta be able to handle brushless power!

I have a hyper7 CD I could mod in.... kinda hard from a wheelchair.

So thats where I'm stuck atm. I need a tranny or something. Anybody wanna step up?

[E-Revonut]

I have 4 maximizer beadlocks, 3-17mm adapters, one stock bulk and lower arm to donate. I'll get them out to you Thursday, along with anything else I can find

[BL_RV0]

Harold did you get the stuff I sent you?

[E-Revonut]

Any progress on this?

[_paralyzed_]

Nope. Half the people that said they were going to send things didn't, and I thought the project was much farther along than it actually was when I took it on. I'm not sure what to do with it.

[jayjay283]

Those new era center braces were mine along with the 3905 chassis with 52 holes in it from dual vxl and the CF center skid.. That stuffs been travelling, I sent it to lincpimp a year ago.. no wonder companies are going out of business... BTW Haraold I spent 2 hours polishing those center brases with wd40 and scotch brite so you better lick them and tell me how they taste.. I notice the CF center dealy is missing..did punk sell it

[_paralyzed_]

tasted like chicken! Mmmm. Chicken. The carbon center skid is still there. I ground the braces a little to mock up a cd. I was wondering why there were so many holes in it!

Since this thread has been resurected I guess it's time to ask for maxx parts again.

I have an ofna hyper 7 cd and lst diffs and hardware for this project. Needs are 2 17mm adapters, tires, and any maxx part you have laying around that might make this truck better.

[_paralyzed_]

Help me out guys. Maxx parts. I supplied:
shock towers/ body posts
a'arms/knuckles/bearings
ti nturnbuckles
LST diffs
steering rack w/bearings
skid plates
f/r aluminum bumpers and mounts
shocks w/ aluminum caps/springs
Imex baja tires
hardware

jayjay supplied:
chassis
chassis braces
alum. bulks?

E-Revonut supplied:
a sweet set of maximizer beadlocks

It's got a decent start to a build. There are some more parts I need though, look deep into your parts buckets. These are all for 3906 style widemaxx arms and knucles on a 3905 chassis. New chassis, old arms: WHAT I NEED

axles
17mm hubs (all 4)
a tranny or cd mount (i have a hyper 7 cd to use) and driveshafts
a body
electronics (I have an 8xl?)

what'ya think guys? I've got these parts here they may as well be put to use.

[JThiessen]

Originally Posted by _paralyzed_

These are all for 3906 style widemaxx arms and knucles on a 3905 chassis. New chassis, old arms:

Harold - I'd consider switching the knuckes to the new style so you can use the bigger driveshafts. I might have a couple shafts and a knuckle or two laying around - but they are not "new" by any means. That would open it up for people to donate knuckles/drive shafts from their revo's and be more brushless ready. If you want to stick with the old style knuckles, I'll have a complete set once my brother in law gets his swapped out for the Revo style.

[BP-Revo]

Harold, maybe throw out a list of what you need?

I put up what I had, I didn't know you actually wanted me to send them. PM me if you actually need the parts.