PIF maxx project

[_paralyzed_]

Help me out guys. Maxx parts. I supplied:
shock towers/ body posts
a'arms/knuckles/bearings
ti nturnbuckles
LST diffs
steering rack w/bearings
skid plates
f/r aluminum bumpers and mounts
shocks w/ aluminum caps/springs
Imex baja tires
hardware

jayjay supplied:
chassis
chassis braces
alum. bulks?

E-Revonut supplied:
a sweet set of maximizer beadlocks

It's got a decent start to a build. There are some more parts I need though, look deep into your parts buckets. These are all for 3906 style widemaxx arms and knucles on a 3905 chassis. New chassis, old arms: WHAT I NEED

axles
17mm hubs (all 4)
a tranny or cd mount (i have a hyper 7 cd to use) and driveshafts
a body
electronics (I have an 8xl?)

what'ya think guys? I've got these parts here they may as well be put to use.

[JThiessen]

Originally Posted by _paralyzed_

These are all for 3906 style widemaxx arms and knucles on a 3905 chassis. New chassis, old arms:

Harold - I'd consider switching the knuckes to the new style so you can use the bigger driveshafts. I might have a couple shafts and a knuckle or two laying around - but they are not "new" by any means. That would open it up for people to donate knuckles/drive shafts from their revo's and be more brushless ready. If you want to stick with the old style knuckles, I'll have a complete set once my brother in law gets his swapped out for the Revo style.