Quote:
Originally Posted by Pdelcast
Believe me, I am looking at doing an 8S or 12S version (or both) of the MMM --
My question is:
Would people be willing to spend an extre $120.00 on a 12S MMM? That's really the minimum extra it would cost to do a 12S controller...
Also, a 12S system would more than likely be Opto, to keep the motor noise from the radio. So would require an external power source for the RX/Servos.
An 8S system would certainly be easier, but still a little more costly than the 6S system.
Patrick
|
So we are talking around 300 bucks for a 12s capable controller that will offer forward, brake and reverse, and be computer programable? I would buy it, as the only other options I can think of are the mgm escs, and they appear to have issues. I have a feeling that you would sell a few, I know that I would do a large scale conversion (1/5) if a decent hv car esc was around. I think that an 8s capable controller would be popular as well. The benefits of hv are quite aparent to me, less heat and more punch at almost any speed. I know cc like to cater to the extreme rc crowd, and this would be a nice flagship car esc. Plus cc service is second to none, which always helps!
Opto is not too bad, escpecially if you can make a hv version of the ccbec! Do have any any plans to bring out a hv bec? Say capable of 12s input?
Threaded Mode
