Will it work?

[Jeremy1976]

I see Mike has these mod1 pinion gears and offers a bore reducer to fit 1/8th and 4mm shafts. Will this pinion work with the stock spur gear on the Slash?? I have been searching high and low for 32 pitch pinions and the teeth selection is limited. I would like to run a 25t. Here is what I am speaking of. My other option is to try to get a hold of Mike and see if I can send back the 1/8th Medusa for a 5mm Medusa.


http://www.rc-monster.com/proddetail...=5mmmod1pinion