Quote:
Originally Posted by jayjay283
I am using the CC MMM combo (2200kv) in my muggy, the muggy weighs in at 7.8 lbs with everything except lipos and wheels. My aluminum gmaxx weighs 7.8 with no wheels or lipos too and runs a MMM/2d. Keep the wheels and lipos as light as possible and it works great. Throw on 800g wheels and tires id up it to a bigger motor.
|
I decided that the money could be spent on a MMM esc and a servo, insted of the 2200 motor. I will just run the 10xl c50 on 6s in the muggy. But thanks for the info...
Quote:
Originally Posted by brushlessboy16
2200 should have no problem pushing a muggy :) now is it of the 6 wheeled variety?
|
Nah, the 6x6 lst will have a hacker c50 11xl and a MMM and run 6s lipo. Basically the setup out of my regular lst, geared a bit lower to take some strain off the motor. Thinking 35mph will be plenty for that truck. i will wait for the 1800 or 1500kv cc motors... 2200 on 6s lipo is just too much for my gearing requirements.
Threaded Mode
