Current draw of a 3511KV 5407L with no load on 2s or 3s lipo? Need some help here.

[zeropointbug]

Originally Posted by J57ltr

Well I didn't know, I didn't think you were supposed to run them at full throttle without a load (though I have done it), and idle to me means low rpm.

Jeff

j/k about that... well about it being complex and all. It's just the no load full rpm is what idle current would be. For instance, my 1512/3D on 6s lipo will consume only 1.5amps at 40,000rpm with no load.

[J57ltr]

Originally Posted by zeropointbug

j/k about that... well about it being complex and all. It's just the no load full rpm is what idle current would be. For instance, my 1512/3D on 6s lipo will consume only 1.5amps at 40,000rpm with no load.

I forget you guys run all those low Kv motors, my lowest is 3.3Kv and they go up from there so my last 3 are well over 60K at 3S

Jeff