Current draw of a 3511KV 5407L with no load on 2s or 3s lipo? Need some help here.

[J57ltr]

Originally Posted by zeropointbug

Well, it's a very complex and time consuming procedure, where you take any load off the motor and run the thing WOT and measure the currents using an eagletree or similar unit. Now, this is only for the non faint of heart and experienced RCist.

Well I didn't know, I didn't think you were supposed to run them at full throttle without a load (though I have done it), and idle to me means low rpm.

Jeff