My E-GST

[maneba]

Originally Posted by tashpop

so how is this truck pulling its weight with 6s power? mine on the 4500 30c 3s geared for about 30 does flip onto its lid and 1/2 time can do mid speed willies. can you do a flip? thats my goal. also is your diff locked, mine was from the original trans. that might have to change so i don't tear everything up or invest into a slipperintial.

I've some problem with MMM, i need to install an old firmware. The new firmware shows too cogging. I use 11T pinion and 66 spur with original center diff.
The monster is powerfull but not from 0 or at low speed. Maybe your esc is better in this case.

[tashpop]

Originally Posted by maneba

I've some problem with MMM, i need to install an old firmware. The new firmware shows too cogging. I use 11T pinion and 66 spur with original center diff.
The monster is powerfull but not from 0 or at low speed. Maybe your esc is better in this case.

idk, its got to be your setup (firmware). i've gotten the best offline punches from my castle esc's, but i haven't ever had a mmm. mines got a real soft off the line launch, then hits hard. i will redo my setup after i get different batteries.