CRT.5 brushless basher

[Gv288]

Couldn't resist the price: 79.99$ for the pro roller that's a steal. Especially if you know that the car continues as a sct truck (SCRT10-E) so all the parts are still available. That's a sweet deal!!
I found a lot of info on these forums, so thanks. Hopefully I can inspire some people too. Enjoy!
Parts used:
Ofna Jammin CRT.5 http://www.ofnawarehouse.com/product...oducts_id=1127
RC Monster motormount and lipotray
conversionkit OFNA Receiver Box Set (OFN40946),
steeringservo: Hitec (5625MG)
Futaba receiver
Mamba Monster ESC + 2650 kVA 5mm V3 motor currently with a 13T pinion
Hyperion 35C 5000 mAh 3s lipo.


First I needed to switch to the long chassis to be able to work with a bigger steering servo:

IMG_3850 [1280x768] by Gv288, on Flickr


IMG_3851 [1280x768] by Gv288, on Flickr

To protect the investment: T-bones

IMG_3853 [1280x768] by Gv288, on Flickr

Lipo fitting: as big as possible :)

IMG_3866 [1280x768] by Gv288, on Flickr

paintwork, not my favorite part

IMG_3869 [1280x768] by Gv288, on Flickr

decals to cover up the paint mistakes ;)

IMG_3890 [1280x768] by Gv288, on Flickr

I Couldn't risk not having enough power, so .....
CC 2650 + mamba max esc: I'm loving it, my tires aren't :))) The drivetrain holds up well, no problems there (and I beat it)

IMG_3897 [1280x768] by Gv288, on Flickr

Almost finished

IMG_3894 [1280x768] by Gv288, on Flickr

Mike's Lipotray a bit redone

IMG_3911 [1280x768] by Gv288, on Flickr

And here she is, still shiny!! not for long though :)

IMG_3914 [1280x768] by Gv288, on Flickr