New here

[RC-Monster Mike]

Welcome aboard! Nice work on the light weight truck! I am a sucker for the lightweight stuff! The 10L is the same diameter and a tough longer than a titan. Here is a free tip for you: The rear turnbuckle can be mounted in the middle of the upper bulkheads with a spacer. This will allow the to remain unbent. These rear turnbuckles must also be beefy, as they sustain a decent load on the track(they will bend or break without a nice, beefy rod). The rear suspension is very similar to a prtotype G-maxx suspension that never made the cut(due to inability to use cvds). Very nice work on that truck, though. It is begging for a center diff!