Emaxx motor setup question

[aqwut]

Originally Posted by lincpimp

Looking at getting my 2wd emaxx back on the road and was wondering what everyone thought of the following setup. The emaxx is completely stock save for diff and driveshaft upgrades and a gmaxx single speed. I have a feigao 15l and a bk 9920 laying around. Would that setup work well on 6s 4200mah 20c lipos? Total motor speed would be around 36k rpm. I would gear for around 40mph as usual. The truck is very light and all I do is bash!

Nice bro.. I'm just thinking the exact same thing While looking at this post... I have my Stock T-Maxx with 4WD, running 6S & 8S, with the 15L.. it's a cool setup... and powered by cheap $100 OEMRC ESC... no heat issues what so ever... I'm thinking of putting it back on the road as well... maybe with some spikes on the rear and skis in the front...

[lincpimp]

Originally Posted by aqwut

Nice bro.. I'm just thinking the exact same thing While looking at this post... I have my Stock T-Maxx with 4WD, running 6S & 8S, with the 15L.. it's a cool setup... and powered by cheap $100 OEMRC ESC... no heat issues what so ever... I'm thinking of putting it back on the road as well... maybe with some spikes on the rear and skis in the front...

That must be a fast truck on 8s, or do you gear it down some when uping the voltage? Spikes and skis sound cool, we will need a vid of that!

[sleebus.jones]

Originally Posted by aqwut

it's a cool setup... and powered by cheap $100 OEMRC ESC... no heat issues what so ever

I've seen those and man they are a good deal. My only question has been if you can use the ESC brakes or are you using the mechanical brakes?