 |
|
|
|
|
|
 |
 |
Temp? |
 |
|
 |
|
(#1)
|
|
Guest
Posts: n/a
|
Temp? -
03.07.2008, 04:24 PM
What motor and ESC temp should I be aiming for with a 12020/7XL on 14 cells? At what temp should I get concerned? Thank you
|
|
|
|
 |
 |
 |
|
|
|
|
|
|
(#2)
|
|
Check out my huge box!
Offline
Posts: 11,935
Join Date: Aug 2007
Location: Slidell, LA
|
03.07.2008, 05:53 PM
If you can keep the motor temp around 160 you will be good, any more than 180 is too hot. Esc temps vary, but I feel that 140 is about as much as I ever want to see. That esc should be fine, but you will want to gear the 7xl down a bit, with 14cells it will be turning around 38k rpm.
|
|
|
|
|
|
|
|
|
|
|
|
|
(#3)
|
|
Guest
Posts: n/a
|
03.07.2008, 11:07 PM
Thanks Lincpimp. I had a 18 tooth, and I think I will start with a 16. Thanks!
|
|
|
|
|
|
|
 |
«
Previous Thread
|
Next Thread
»
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Linear Mode
|
|
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
